UOPTIC 2 SPEC SHEET
Water clear plastic with a hard surface suitable for polishing. | |||
Properties | Method | Cure 1 | Cure 2 |
Hardness (shore D) | ASTM D-2240 | 80 ± 5 | 80 ± 5 |
Tensile Strength (psi) | ASTM D-638 | 8,000 | 10,000 |
Elongation at Break | ASTM D-638 | 2% | 2% |
Compression Strength (psi) | ASTM D-695 | N/A | N/A |
Compression Modulus (psi) | ASTM D-695 | N/A | N/A |
Ultimate Flex Strength (psi) | ASTM D-790 | N/A | N/A |
Flexural Modulus (psi) | ASTM D-790 | 250,000 | 325,000 |
Notched Izod (ft.lbs/in) | ASTM D-256 | 0.5 | 0.6 |
Linear Shrink (in/in) | ASTM D-2566 | 0.004 | 0.004 |
Heat Deflection Temp (66 psi) | ASTM D-648 | 60°C / 140°F | 60°C / 140°F |
8 hour @ 150°F post-cure (66 psi) | ASTM D-648 | 77°C / 170°F | N/A |
Specific Gravity (g/cc) | 1.1 | 1.1 |