PC-ISO (polycarbonate-ISO), an industrial thermoplastic, which in its raw state, is biocompatible (ISO 10993 USP Class VI) and can be gamma or EtO sterilized. PC-ISO is commonly used in food and drug packaging and medical device manufacturing because of the material's strength and medical compatibility. When combined with a Fortus® 3D Production system, PC-ISO gives you real parts that can be used for conceptual modeling, functional prototyping, and end-use parts.
Mechanical PropertiesTest MethodEnglishMetric
Tensile Strength (Type 1, 0.125", 0.2"/min) ASTM D638 8,300 psi 57 MPa
Tensile Modulus (Type 1, 0.125", 0.2"/min) ASTM D638 289,800 psi 2,000 MPa
Tensile Elongation (Type 1, 0.125", 0.2"/min) ASTM D638 4% 4%
Flexural Strength (Method 1, 0.05"/min) ASTM D790 13,100 psi 90 MPa
Flexural Modulus (Method 1, 0.05"/min) ASTM D790 310,400 psi 2,100 MPa
IZOD Impact, notched (Method A, 23°C) ASTM D256 1.6 ft-lb/in 86 J/m
IZOD Impact, un-notched (Method A, 23°C) ASTM D256 1 ft-lb/in 53 J/m

Thermal PropertiesTest MethodEnglishMetric
Heat Deflection (HDT) @ 66 psi ASTM D648 271°F 133°C
Heat Deflection (HDT) @ 264 psi ASTM D648 260°F 127°C
Glass Transition (Tg) DMA (SSYS) 322°F 161°C
Vicat Softening ISO 306 282°F 139°C

Electrical PropertiesTest MethodValue Range
Volume Resistivity ASTM D257 1.5x1014 - 8.0x1013 ohms
Dielectric Constant ASTM D150-98 3.0 - 2.8
Dissipation Factor ASTM D150-98 .0009 - .0005
Dielectric Strength ASTM D149-09, Method A 370 - 70 V/mm

Other TestMethodValue
Specific Gravity ASTM D792 1.2
Flame Classification UL 94 HB

System Availability Layer Thickness Capability Support Structure Available Colors
Fortus 900mc0.013 inch (0.330 mm)BASSWhite
0.010 inch (0.254 mm)Translucent Natural
0.007 inch (0.178 mm)
Actual part properties may vary slightly from those listed above based on processing parameters, operating conditions, and material usage. Forecast3D makes no warranties of materials for any particular application, nor does it make a warranty of any type, expressed or implied, including, but not limited to, the warranties of merchantability for a particular purpose.

Forecast3D is a world class 3D printing and Rapid Manufacturing facility located in Carlsbad, CA specializing in high-quality rapid prototyping, 3D printing (SLA, SLS, FDM, Polyjet, and DMLS), short-run manufacturing and CNC machining, and is well known for its unique ProCAST RTV & Hybrid Tooling capabilities.