RAPID PROTOTYPING SOLUTIONS » PROCAST RTV TOOLING » Special Application Plastics

EMED *
Conforms to the requirements for a USP class VI medical grade plastic. Download pdf

EMED HT *
Conforms to the requirements for a USP class VI medical grade plastic. High strength, ridged bonds, resistant to chemicals including water. Can be subjected to some forms of sterilizations. Download pdf

ALLTEM
A superior, high performance urethane with a notched izod impact strength greater than 2.0! This tough, all purpose resin is our most popular choice for tough ABS like performance. Download pdf

GPLUS
Excellent performance in a graphite-filled composite plastic. Good for wind tunnel test models. Not recommended for parts with thick walls. Download pdf

UPRO/60 SHORE D
Perfect for use of living hinge application. Download pdf

UABS HT
Mimics ABS properties with high impact resistant. Download pdf

UFAR 25
A urethane material specially formulated to meet aerospace FAR 25.853 for flammability requirements. Download pdf

* Our EMED line of resins are at a premium cost, please contact your Project Coordinator for more information on material and cost.

Technical Data (Comparison Chart)

PHYSICAL PROPERTIES
PROPERTIES Units ASTM EMED EMED HT ALLTEM GPLUS UPRO/60 SHORE D UABS HT UFAR 25
Tensile Lap Shear@75 F psi 75° 2,000            
Hardness, Shore D     75D 90 91D 89D 60+2 80D 80D
Shrinkage in/in D2566 .0018   .0047 0.0033 0.0035    
Specific Gravity grams/cc D1475
D792		     1.63 1.33 1.12    
Density lb/cu.in. D792           9.50 9.92
Tensile Strength psi 75°F
D638		 12,000
11,600		 9,500 7,790 7,690 3,725   9,900-10,000
Tensile Modulus psi D638 450,000 400,000 765,000 658,000 39,000   520,000-5550,000
Compressive Strength@ Yield psi D695              
Compressive Modulus psi D695              
Flexural Strength, 2 in span psi D790     16,155 12,326 1,310    
Flexural Modulus psi D790     770,000 661,000 33,200 333,500 268,250
Elongation % 75°F
D638		 3.4
3		   1.46 1.54   11 13
Izod Impact, notched ft.lb./in D256         3.8    
Heat Deflection Temp °F D648 302@264psi   310@264 448@66
318@264		      
Glass Transition Temp (Tg)   E1545 °F           207-217
last updated:02.13.07