| Rigid Epoxies & Urethanes | Silicone & Urethane Rubbers | Water Clear Urethanes | Eco Performance Resins |
| Special Application Plastics | Flexible Urethanes | Composite Castings |
Special Application Plastics
UABS AF (Advanced Formula glass filled urethane.)
With the addition of milled glass fibers into our very popular UABS 85 material, we create a composite urethane with high performance characteristics not normally found in thermoset plastics. In situations where greater part stiffness is required, by the addition of these reinforcing fibers, UABS-AF can produce castings that have improved stiffness and excellent impact resistance along with a very high Flexural Modulus. This material has the strength to perform in the most demanding of prototype and production applications.
View spec sheet -
Download pdf
EMED *
Conforms to the requirements for a USP class VI medical grade plastic.
Download pdf
EMED HT *
Conforms to the requirements for a USP class VI medical grade plastic. High strength, ridged bonds, resistant to chemicals including water. Can be subjected to some forms of sterilizations.
Download pdf
ALLTEM
A superior, high performance urethane with a notched izod impact strength greater than 2.0! This tough, all purpose resin is our most popular choice for tough ABS like performance.
Download pdf
GPLUS
Excellent performance in a graphite-filled composite plastic. Good for wind tunnel test models. Not recommended for parts with thick walls.
Download pdf
UPRO/60 SHORE D
Perfect for use of living hinge application.
Download pdf
UABS HT
Mimics ABS properties with high impact resistant.
Download pdf
UFAR 25
A urethane material specially formulated to meet aerospace FAR 25.853 for flammability requirements.
* Our EMED line of resins are at a premium cost, please contact your Project Coordinator for more information on material and cost.
Technical Data Comparison Chart
| PHYSICAL PROPERTIES | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| PROPERTIES | Units | ASTM | EMED | EMED HT | ALLTEM | GPLUS | UPRO/60 SHORE D | UABS HT | UFAR 25 |
| Tensile Lap Shear@75 F | psi | 75° | 2,000 | ||||||
| Hardness, Shore D | 75D | 90 | 91D | 89D | 60+2 | 80D | 80D | ||
| Shrinkage | in/in | D2566 | .0018 | .0047 | 0.0033 | 0.0035 | |||
| Specific Gravity | grams/cc | D1475 D792 |
1.63 | 1.33 | 1.12 | ||||
| Density | lb/cu.in. | D792 | 9.50 | 9.92 | |||||
| Tensile Strength | psi | 75°F D638 |
12,000 11,600 |
9,500 | 7,790 | 7,690 | 3,725 | 9,900-10,000 | |
| Tensile Modulus | psi | D638 | 450,000 | 400,000 | 765,000 | 658,000 | 39,000 | 520,000-5550,000 | |
| Compressive Strength@ Yield | psi | D695 | |||||||
| Compressive Modulus | psi | D695 | |||||||
| Flexural Strength, 2 in span | psi | D790 | 16,155 | 12,326 | 1,310 | ||||
| Flexural Modulus | psi | D790 | 770,000 | 661,000 | 33,200 | 333,500 | 268,250 | ||
| Elongation | % | 75°F D638 |
3.4 3 |
1.46 | 1.54 | 11 | 13 | ||
| Izod Impact, notched | ft.lb./in | D256 | 3.8 | ||||||
| Heat Deflection Temp | °F | D648 | 302@264psi | 310@264 | 448@66 318@264 |
||||
| Glass Transition Temp (Tg) | E1545 | °F | 207-217 | ||||||
| Rigid Epoxies & Urethanes | Silicone & Urethane Rubbers | Water Clear Urethanes | Eco Performance Resins |
| Special Application Plastics | Flexible Urethanes | Composite Castings |
|
|
|